Windsurf Foiling Accessories

2020 Front Wing Windsurf 1150

For 2020, Naish introduces an all new wing that builds on our design philosophy of creating wings that get freeride and freerace windsurf foilers up and riding in the lightest possible conditions with relatively small sails. The new wing features a higher aspect ratio, refined delta planform, and a unique ‘thin’ foil section that delivers early take off, longer easier glides, and improved top speed. Rather than being exclusively focused for upwind/downwind work, this wing also performs exceptionally well on reaches, making it the optimum set up for the traditional sailing at most locations in the world.

Includes Wing Cover.

2020 Front Wing Jet 1050

For 2020, our core surf wings produce the same or better lift size for size and are faster, tighter turning and easier to control. Improved speed makes them suitable for an even wider range of conditions (especially bigger surf), while the constant curve front profile adds control and precision, allowing the rider to draw sharper lines on the wave. The high lift coefficient delivers exceptionally early take off, making these wings not only easier to surf, but also an excellent choice for wake surfing, kite and - especially in combination with the Naish Hover Crossover boards - windsurf foilers. 

Includes Wing Cover.

2020 Stabilizer 320

All new for 2020, the 320 backwing adds stability to the excellent turning ability of our previous anhedral design, increasing performance on all levels - speed, control, and even more intuitive turning. By moving the rudder control function to the wingtips, we’ve reduced drag and freed up more center span for stability.

2020 Naish backwings can also be retrofitted to existing Naish foil sets with an adaptor (available as an accessory)

Includes Stabilizer Cover.

2020 Aluminum Mast 65 cm

Naish masts are extruded from aircraft grade extruded aluminum, sandblasted with 120 grit prior to anodizing, then wet sanded with 600 grit to achieve the optimum surface. The result is a strong, stiff mast that also delivers excellent torsional rigidity and has clean release and minimum drag. 

2020 Aluminum Mast 75 cm

Naish masts are extruded from aircraft grade extruded aluminum, sandblasted with 120 grit prior to anodizing, then wet sanded with 600 grit to achieve the optimum surface. The result is a strong, stiff mast that also delivers excellent torsional rigidity and has clean release and minimum drag. 

2020 Aluminum Mast 85 cm

Naish masts are extruded from aircraft grade extruded aluminum, sandblasted with 120 grit prior to anodizing, then wet sanded with 600 grit to achieve the optimum surface. The result is a strong, stiff mast that also delivers excellent torsional rigidity and has clean release and minimum drag. 

2020 Aluminum Mast 95 cm

Naish masts are extruded from aircraft grade extruded aluminum, sandblasted with 120 grit prior to anodizing, then wet sanded with 600 grit to achieve the optimum surface. The result is a strong, stiff mast that also delivers excellent torsional rigidity and has clean release and minimum drag. 

2020 Windsurf Fuselage

For 2020, the Naish modular fuselage system has been completely redesigned - a new external geometry reduces weight and hydrodynamic drag, and a new simplified rear wing connection makes assembly a breeze. The industry standard indexed scarf front wing connection has been retained so that existing and future wing designs are interchangeable. Naish fuselages are CNC precision cut from aircraft grade aluminum, and then 120 grit sandblasted pre anodizing for optimum smoothness and durability.

2020 Standard Plate

This (4) bolt mounting plate fits all Naish alloy masts, and can be mounted/dismounted from board by simply loosening the bolts thanks to our slotted hole system. An additional set of mounting holes increases the range of positions on the board.

(Includes Board Mount Screws)

2020 Abracadabra Plate

For 2020, the game-changing Abracadabra plate incorporates an ergonomic thumb screw (with a Torx socket) that makes connecting your foil to your board even faster and more convenient, and a quad concave bottom plate that accommodates the widest possible range of board bottom shapes.

(Includes Board Mount Screws)

2020 Tuttle

The Tuttle connection provides a convenient and easy connection to boards with a Tuttle box.

2020 Deep Tuttle

The Deep Tuttle connection provides a convenient and easy connection to boards with a Deep Tuttle box.

2020 Powerbox Adapter

Naish’s new Powerbox Adapter allows the use of any four bolt plate, Abracadabra included, on any board with a Powerbox.

Like a 10” track system, the Naish Powerbox Adapter allows the rider to mount their foil in the desired position. As most windsurfing boards with Powerboxes are not designed for foiling, the ability to mount the foil in an optimal position is extremely valuable.

The CNC cut aluminum plate is lightweight, durable and evenly spreads the load of a foil. Four EVA foam blocks give a buffer zone between the plate and board to keep the plate evenly distributed on the usual V-bottom shaping of windsurfing boards and ensure a good fit.

The Powerbox Adapter includes screws and t-nuts to connect to Standard or Abracadabra plates, but does not include foil mounting hardware or the screw to mount the plate to the board. To mount the plate to your board use the manufacturers recommended screw length.

2020 Front Wing Cover Windsurf 1150

2020 Front Wing Cover Jet 1050

2020 Stabilizer Cover 320

2020 Carry Bag Windsurf

Accommodates and protects a complete set of the 2020 Naish kite or windsurf setups with space for one extra front wing. 

2020 Complete Foil Assembly Screw Set (Torx)

Three (3) M6 30 mm Titanium Torx Screws 
Three (3) M6 30 mm Stainless Steel Torx Screws 
Five (5) M6 20 mm Titanium Torx Screws

2019 Complete Foil Assembly Screw Set (Philips Head)

Three (3) M6 20 mm Stainless Steel Screws
Six (6) M6 30 mm Stainless Steel Screws 
Two (2) M6 15 mm Stainless Steel Screws 
One (1) M6 Stainless Steel Mini T-bar

2018 Complete Foil Assembly Screw Set (Philips Head)

Three (3) M6 20 mm Stainless Steel Screws 
Six (6) M6 30 mm Stainless Steel Screws 
Two (2) M6 15 mm Stainless Steel Screws 
Two (2) M6 Stainless Steel Mini T-nuts

2020 Board Mount Screw Set - Standard Plate (Torx)

Four (4) M6 25 mm Stainless Steel Torx Screws 
Four (4) M6 Stainless Steel T-nuts

2020 Board Mount Screw Set - Abracadabra Plate (Torx)

Four (4) M6 30 mm Stainless Steel Torx Screws
Four (4) M6 Stainless Steel T-nuts

2019 Board Mount Screw Set - Standard Plate (Philips Head)

Four (4) M6 25 mm Stainless Steel Screws 
Four (4) M6 Stainless Steel T-nut

2019 Board Mount Screw Set - Abracadabra Plate (Philips Head)

Four (4) M6 30 mm Stainless Steel Screws 
Four (4) M6 Stainless Steel T-nut

Men's Apparel

ESTABLISHED TEE

Heathered Grey

Sizes: S | M | L | XL

100% Cotton

BORN TO RIDE TEE

Black

Sizes: S | M | L | XL

100% Cotton

LOGO TEE

Black

Sizes: S | M | L | XL

100% Cotton

WAVES RECTANGLE TEE

Black

Sizes: S | M | L | XL

100% Cotton

LESS BS TEE

Black

Sizes: S | M | L | XL

100% Cotton

Women's Apparel

CIRCLE SUNSET TEE

Deep Teal

Sizes: S | M | L | XL

100% Cotton

FLOWER DIAMOND TANK

White

Sizes: S | M | L | XL

100% Cotton

Headwear

NAISH DIAMOND SNAPBACK

Black

Acrylic

Flat Bill

RECTANGLE PATCH SNAPBACK

Grey

Acrylic

Flat Bill

WAVE PATCH SNAPBACK

Brown

Acrylic

Flat Bill

NAISH SKULL TRUCKER

Black

Curved Bill

NAISH TRUCKER

Black

Curved Bill

PALM SUNSET TRUCKER

Digital Print

Curved Bill

Waterwear

SLEEVELESS LOOSE FIT (HEATHERED GREY)

Sizes: S | M | L | XL

87% Nylon, 13% Spandex

SLEEVELESS LOOSE FIT (BLUE)

Sizes: S | M | L | XL

87% Nylon, 13% Spandex

SHORT SLEEVE LOOSE FIT (HEATHERED GREY)

Sizes: S | M | L | XL

87% Nylon, 13% Spandex

SHORT SLEEVE LOOSE FIT (BLUE)

Sizes: S | M | L | XL

87% Nylon, 13% Spandex

LONG SLEEVE LOOSE FIT (HEATHERED GREY)

Sizes: S | M | L | XL

87% Nylon, 13% Spandex

LONG SLEEVE LOOSE FIT (BLUE)

Sizes: S | M | L | XL

87% Nylon, 13% Spandex

Travel Bags

Sport Backpack

Office Backpack

Small Roller Bag

Carry-on

Medium Roller Bag

Check-in

Large Roller Bag

Check-in

Duffle Bag

Sizes: SMALL (50 L) | MEDIUM (80 L) | LARGE (200 L)

Gear Bags

Coffin Bag

Sizes: 148 cm, 158 cm

Surfboard Bag

Sizes: 5'8"/173 cm | 6'0"/183 cm

2+1 Surfboard Bag

Size: 6'2"/188 cm

Fly under the radar. The 2+1 bag features a bonus compartment to conceal a third board, while fitting within the two-board limit dictated by most airlines. Fly once and the bag pays for itself. 

SUP Travel Boardbag

Sizes: 8'6" | 9'6" | 10'6" | 11'6" | 12'6" X28 | 12'6" X31 | 14'0" X26 | 14'0" X30

SUP Paddle Bag


Accessories

Roof Rack Strap Set

35 m

Roof Rack Pad Set

50 cm

Poncho

Beach Mat

9'x10'

Beach Tent

10'x10'

Flag Diamond Script

100 cm x 150 cm, 200 cm x 300 cm

Beach Flag & Frame

Promo

Waves Rectangle Sticker

(9.125"x2")

Established 1979 Sticker

(4"x2.75")

Wave Badge Sticker

(3.5"x4")

Circle Sunset Sticker

(4"x4")

Pirate Skull Sticker

(6"x5")

Born To Ride Sticker

(3.5"x4")